CRZ FTS
With its slim design the CRZ FTS is a compact robotic welding system ideal for small parts. The CRZ FTS can be configured as a single station or dual station system. Each station can be equipped with either a flat table or trunnion for part positioning.
Applications: —
Weight capacity: 272 – 340 Kg.
Base Positioner Configuration | Table dimension – Two stations 28-inches (711-mm) x 28-inches (711-mm) Load height 32-inches (812-mm) Weight capacity 750-lbs (340-kg) |
Base Component Configuration | FANUC ArcMate 100iC or Panasonic TA-1400 G3 Tregaskiss, Binzel or TBi air-cooled through arm torch Genesis torch alignment package Safety package (includes manual sliding doors, gate interlock and barriers) Genesis Allen-Bradley controls package with L1 processor |
Standard Dimensional Specifications | Table dimension – Two stations 28-inches (711-mm) x 28-inches (711-mm) Table height – 32-inches (812-mm) Cell width – 63-inches (1600-mm) Cell depth – 06-inches (2692-mm) Cell height – 91-inches (2311-mm) |
Standard Capacity Specifications | Weight capacity (table configuration) – 750-lbs (340-kg) Weight capacity (trunnion configuration) – 600-lbs (272-kg) for two station trunnion Engineering specifications for 600-lbs capacity trunnion – Gearbox rated torque 1617Nm – Gearbox ratio 161:1 – Gearbox maximum moment 2940Nm – Motor maximum RPM 4,000 – Motor torque output 12Nm – Nominal acceleration .5 seconds – Allowable tool out of balance torque 250Nm – 180-degree index time 2.0 seconds |
Standard Platform Options | Two station trunnion – (28-inch tool length, 24-inch tool swing diameter) Roll down safety barrier Exposed power track cable carrier system Smoke hood and extraction system Off-line programming Installation Training programs (basic, advanced, maintenance, off-line, CRAW) Intelligence CenterTM |
Standard Component Options | Robot models: FANUC, Panasonic, Motoman Process gear: Miller, Lincoln, Fronius, Thermadyne, Hypertherm Welding torches: Tregaskiss, Binzel, TBi, Fronius Torch cleaners: Tregaskiss, Binzel, TBi Controls: PanelView 1000+ Compact |
Need assistance choosing the right system?

Give us a call and one of our knowledgeable sales representatives will help!
563-445-5600Request a Quote:
Key Features
Productivity
- Reduces downtime during
fixture changeover - Independent stations reduce overall
cycle time - System configuration allows for multiple
in-line program layout – progressive
processing application
Functionality
- Quick installation – single unitized base
- Manual sliding doors reduce required
floor space and operator walk distances
Reliability
- Pre-engineered, proven design
- Single source responsibility
- 24-hour support service
Flexibility
- Able to accommodate several
configurations - Single or twin stations, stations can be
equipped with either a flat table or
trunnion for part positioning - Easily configured to meet application
requirement